EASY mode and EXPERT mode
EASY mode utilizes a simple intuitive interface for optimizing tone to music or speech, gain level on Amp Simulator, and depth of reverb. And EXPERT mode gives users more detailed control.
*Please turn on [COMP/EQ](CH1) and [EFFECT](CH1/CH2) switches on the AG mixing console, when using the compressor, parametric equalizer or reverb functions in EXPERT mode.
Compressors decrease loud sounds and increase quiet sounds. Through using these functions, the difference between loud and quiet sounds is reduced, the overall level of sound is more balanced, and the audio becomes easier to hear.
This sets the compressor’s output signal level.
This determines the amount of compression, that is, the change in output signal level relative to change in input signal level.
This determines the level of input signal required to trigger the compressor.
This determines how soon the signal will be compressed once the compressor has been triggered.
This determines how soon the compressor returns to its normal gain once the trigger signal level drops below the threshold. The value is expressed as the duration required for the level to change by 6 dB.
Equalizers are effects that adjust tone by boosting and attenuating specific frequencies. And HPFs serve to cut unneeded low sounds and are used in such applications as cutting breathing noises during vocals.
Reverberation is an effect that brings out the depth and width of sound by adding signals that mimic the feel of a performance space with sizes ranging from a large hall to small room. Singing performers are often reinforced with this effect.
AG Guitar Amp Sumulator is a high-gain tube amp that is rich in overtones. It is ideally suited to playing lead guitar lines that will fit in well in an ensemble, but it can also be set up for crisp accompaniment tones as well.
Selects the amp output type. The [High] setting simulates a high-output amp, and allows the creation of more distorted tones.
Adjusts the input level applied to the preamp stage. Rotate clockwise to increase the amount of distortion produced.
Adjusts the output level from the preamp stage.
These three controls adjust the amplifier’s tonal response in the high, middle, and low frequency ranges.
Used to emphasize the high frequencies and overtones.
Adjusts the final output level.
|Namn||OS (Operativsystem)||Storlek||Senaste uppdateringen|
|Yamaha Steinberg USB Driver V2.0.4 for Windows 11/10 (64-bit)||Win||7.1MB||2020-09-25|
|Yamaha Steinberg USB Driver V2.0.3 for Windows 10/8.1/7 (32-bit/64-bit)||Win||7.1MB||2020-03-02|
|AG DSP Controller V1.2.0 Mac macOS 11(Intel/Apple M1), 10.15-OS X 10.7||Mac||2MB||2016-12-14|
|AG DSP Controller V126.96.36.199 for Win 10/8.1/8/7(SP1)||Win||10.6MB||2015-10-09|